Bernhard Huber

Bernhard Huber
Univ.Ass. Dipl.-Ing. Dr.techn.
Photo
E-Mail
Phone +43(1)58801-18229
Fax +43(1)5869149
Address



Vienna University of Technology
Department of Computer Engineering
Cyber-Physical Systems
Treitlstrasse 3, 3rd floor, 1040 Wien, Austria

 

Bernhard Huber has studied Computer Science at the Vienna University of Technology and received the Dipl.-Ing. (MSc) degree in 2004. In January 2008, Bernhard Huber has finished his doctoral studies with Prof. Hermann Kopetz as supervisor. Since 2004 he is a research and teaching assistant at the Institute of Computer Engineering, Real-Time Systems Group at the Vienna University of Technology.

Publications

 

Doctoral thesis:

 

"Resource Management in an Integrated Time-Triggered Architecture".

Vienna University of Technology, Institute of Computer Engineering.

Supervisor: Prof. Hermann Kopetz. January 2008.

 

Publications in Scientific Journals / Book Chapters

 

Roman Obermaisser, Christian El Salloum, Bernhard Huber, Hermann Kopetz:

"From a Federated to an Integrated Automotive Architecture";

In IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol.28, no.7, pp.956-965, July 2009

 

Bernhard Huber and Roman Obermaisser:

"Platform Modeling in Safety-Critical Embedded Systems";

In Lecture Notes in Electrical Engineering, Vol. 38 "Intelligent Technical Systems", February 2009.

 

Roman Obermaisser, Christian El Salloum, Bernhard Huber, and Hermann Kopetz:

"Modeling and Verification of Distributed Real-Time Systems using Periodic Finite State Machines";

Journal of Computer Systems Science & Engineering, Vol. 22(6), November 2007.

 

Wolfgang Herzner, Bernhard Huber, György Csertan, and András Balogh:

"The DECOS tool-chain: Model-based development of distributed embedded safetycritical real-time systems";

ERCIM News, 67:22–24, October 2006.

 

Roman Obermaisser, Philipp Peti, Bernhard Huber, and Christian El Salloum:

"DECOS: An integrated time-triggered architecture";

e&i journal (journal of the Austrian professional institution for electrical and information engineering), 3:83–95, March 2006.

 

Bernhard Huber and Wilfried Elmenreich:

"Wireless time-triggered real-time communication";

Telematik Magazin, 10(3/4):44–50, December 2004.

 

Conference and Workshop Papers

 

2009:

 

Roman Obermaisser and Bernhard Huber:

"The GENESYS Architecture: A Conceptual Model for Component-Based Distributed Real-Time Systems"";

Accepted for publication at 7th IFIP Workshop on Software Technologies for Future Embedded and Ubiquitous Systems (SEUS), Newport Beach, CA, USA, November 2009.

 

Roman Obermaisser and Bernhard Huber:

"A Multi-Core Platform for Integrated Modular Avionics Derived from a Cross-Domain Embedded System Architecture";

Accepted for publication at SAE 2009 AeroTech Congress & Exhibition, Seattle, Washington, USA, November 2009.

 

Bernhard Huber and Roman Obermaisser:

"An ARTEMIS Cross-Domain Embedded System Architecture and its Instantiation for Real-Time Automotive Applications";

Accepted for publication at 30th IFAC Workshop on Real-Time Programming, Mragowo, Poland, October 2009.

 

Bernhard Huber and Roman Obermaisser:

"A Comparison of NoTA and GENESYS";

In Proceedings of 9th International Workshop on Systems, Architectures, Modeling, and Simulation (SAMOS'09), Samos, Greece, July 2009.

 

Roman Obermaisser, Christian El Salloum, Bernhard Huber and Hermann Kopetz:

"Fundamental Design Principles for Embedded Systems: The Architectural Style of the Cross-Domain Architecture GENESYS";

In Proceedings of 12th International Symposium Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC'09), Tokyo, Japan, March 2009.

 

2008:

 

Bernhard Huber, Christian El Salloum, Roman Obermaisser:

"A Resource Management Framework for Mixed-Criticality Embedded Systems";

In Proceedings of the 34th Annual Conference of the IEEE Industrial Electronics Society (IECON'08), Orlando, FL, USA, November 2008.

 

Hermann Kopetz, Christian El Salloum, Bernhard Huber, Roman Obermaisser, Christian Paukovits:

"Composability in the Time-Triggered System-on-Chip Architecture";

In Proceedings of the 21st Annual IEEE International SoC Conference, Newport Beach, CA, USA, September 2008.

 

Roman Obermaisser, Bernhard Frömel, Christian El Salloum, Bernhard Huber:

"Integrating Safety and Multimedia Subsystems on a Time-Triggered System-on-a-Chip";

In Proceedings of the 6th IEEE International Conference on Industrial Informatics (INDIN'08), Daejeon, Korea, July 2008.

 

Roman Obermaisser, Christian El Salloum, Bernhard Huber, Hermann Kopetz:

"The Time-Triggered System-on-a-Chip Architecture";

In Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE'08), Cambridge, UK, June 2008.

 

Christian El Salloum, Roman Obermaisser, Bernhard Huber, and Hermann Kopetz:

"A Novel Naming Scheme for System-on-a-Chips Supporting Dynamic Resource Management";

In Proceedings of the 7th European Dependable Computing Conference (EDCC-7), Kaunas, Lithuania, May 2008.

 

2007:

 

Bernhard Leiner, Martin Schlager, Roman Obermaisser and Bernhard Huber:

"A Comparison of Partitioning Operating Systems for Integrated Systems";

In Proceedings of 26th International Conference on Computer Safety, Reliability and Security (SAFECOMP'07), Nuremberg, Germany, September 2007.

 

Wolfgang Herzner, Rupert Schlick, Martin Schlager, Bernhard Leiner, Bernhard Huber, András Balogh, György Csertan, Alain LeGuennec, Thierry LeSergent, Neeraj Suri and Shariful Islam:

"Model-Based Development of Distributed Embedded Real-Time Systems with the DECOS Tool-Chain";

In Proceedings of SAE 2007 AeroTech Congress & Exhibition, Los Angeles, CA, USA, September 2007.

 

Bernhard Huber and Roman Obermaisser:

"Model-Based Development of Integrated Computer Systems: Modeling the Execution Platform";

In Proceedings of 5th International Workshop on Intelligent Solutions in Embedded Systems (WISES'07), Madrid, Spain, June 2007.

 

Hermann Kopetz, Roman Obermaisser, Christian El Salloum, and Bernhard Huber:

"Automotive software development for a multi-core system-on-a-chip";

In Proceedings of 4th International ICSE Workshop on Software Engineering for Automotive Systems (SEAS'07), Minneapolis, USA, May 2007.

 

Roman Obermaisser, Hermann Kopetz, Christian El Salloum, and Bernhard Huber:

"Error containment in the time-triggered system-on-a-chip architecture";

In Proceedings of International Embedded Systems Symposium (IESS'07), Irvine, CA, USA, May 2007.

 

Hermann Kopetz, Christian El Salloum, Bernhard Huber, and Roman Obermaisser:

"Periodic finite-state machines";

In Proceedings of 10th IEEE International Symposium on Object and Component-Oriented Real-time Distributed Computing (ISORC’07), Santorini, Greece, May 2007.

 

Christian El Salloum, Roman Obermaisser, Bernhard Huber, Harald Paulitsch, and Hermann Kopetz:

"A time-triggered system-on-a-chip architecture with integrated support for diagnosis";

In Proceedings of Design, Automation and Test in Europe (DATE’07), Nice, France, April 2007.

 

2006:

 

Christian El Salloum, Roman Obermaisser, Bernhard Huber, Hermann Kopetz, and Neeraj Suri:

"Supporting heterogeneous applications in the DECOS integrated architecture";

In Proceedings of International DECOS Workshop at the Mikroelektroniktagung 2006,pages 183–193, Vienna, Austria, October 2006.

 

Wolfgang Herzner, Martin Schlager, Thierry Le Sergent, Bernhard Huber, Shariful Islam, Neeraj Suri, and András Balogh:

"From model-based design to deployment of integrated, embedded, real-time systems: The DECOS tool-chain";

In Proceedings of International DECOS Workshop at the Mikroelektroniktagung 2006, pages 204–213, Vienna, Austria, October 2006.

 

Roman Obermaisser and Bernhard Huber:

"Model-based design of the communication system in an integrated architecture";

In Proceedings of International Conference on Parallel and Distributed Computing and Systems (PDCS 2006), Dallas, USA, October 2006.

 

Bernhard Huber, Roman Obermaisser, and Philipp Peti:

"MDA-Based development in the DECOS integrated architecture - modeling the hardware platform";

In Proceedings of 9th IEEE International Symposium on Object and Component-Oriented Real-time Distributed Computing  (ISORC’06); pages 43-52, Gyeongju, Korea, April 2006.

 

2005:

 

Ingomar Wenzel, Raimund Kirner, Martin Schlager, Bernhard Rieder, and Bernhard Huber:

"Impact of dependable software development guidelines on timing analysis";

In Proceedings of International Conference on Computer as a Tool (EUROCON'05); pages 575-578, Belgrade, Serbia & Montenegro,  November 2005.

 

Bernhard Huber, Philipp Peti, Roman Obermaisser, and Christian El Salloum:

"Using RTAI/LXRT for partitioning in a prototype implementation of the DECOS architecture";

In Proceedings of 3rd Workshop on Intelligent Solutions in Embedded Systems (WISES’05); Hamburg, Germany, May 2005.

 

2004:

 

Bernhard Huber and Wilfried Elmenreich:

"Wireless time-triggered real-time communication";

In Proceedings of 2nd Workshop on Intelligent Solutions in Embedded Systems (WISES’04); Graz, Austria, June 2004.

 

The following page contains a complete list of Bernhard Huber's publications and research reports.